Motorola MC45 Integrator Manual page 23

Installing the battery
Figure 1-5
With the battery cover latch open, insert the battery cover, top first, then press down on the bottom cover
3.
Slide the battery cover latch to the right until the red dot is not visible.
4.
Figure 1-6 Locking the battery cover latch
Power up the MC45 by pressing the red Power button.
5.
To remove the battery:
Press the red Power button for 3 seconds until a screen appears.
1.
NOTE If the MC45 is in Suspend mode, press the red Power button to wake the MC45.
Select the Power Off option to turn off the MC45.
2.
Slide the battery cover latch to the left until the green indicators align with the eject icon and the red dot is
3.
visible. The battery cover ejects slightly.
Figure 1-7 Unlocking the battery cover latch
Eject icon
Green indicators
Red dot
Getting Started 1 - 5