Table of Contents
Advertisement
A
IP Setting
B
IP Address
C
Subnet Mask
D
Default Gateway
E
Host Name
F
DNS Server
G
MAC Address
For setting the DHCP client function.
Connect VN-V686WPU to a network environment with a DHCP server when
DHCP is to be enabled.
If the DHCP server does not exist when DHCP is set to Enable , VN-
V686WPU will start running with the 192.168.0.2 IP address and
255.255.255.0 subnet mask in about 2 minutes after startup.
Refer to [IP Address Settings] (A Page 26) for the IP address.
For setting the IP address of VN-V686WPU.
For setting the subnet mask of VN-V686WPU.
For setting the default gateway of VN-V686WPU.
Set as 0.0.0.0 when a default gateway is not set.
For setting the host name of VN-V686WPU.
Specify a name using alphanumeric characters, hyphen (-) or period (.).
Underscores (_) cannot be used.
For setting the address of the DNS server.
The MAC address of VN-V686WPU is displayed in a hexadecimal number.
Advertisement
Table of Contents
