Table of Contents
Advertisement
3
Connecting the alarm cable
(A Page 22)
Connect the alarm cable and wind the
waterproof tape (adhesive).
After connecting, push the cable into the arm of
the camera.
Note ：
● For cables that are not used, be sure to wrap
the ends individually with insulating tape.
● For safety reasons, turn on the power only after
all the connection is complete.
Arm
Wind the waterproof tape
(adhesive)
4
Mount the cap
5
Seal the cable connection hole and
around the mounting surface of the
camera with waterproof seal (GE
silicon).
4
Cap
5
Waterproof
treatment
Note ：
● Ensure that waterproof treatment is performed.
Otherwise, the camera may malfunction due to
rain water seepage.
● Use GE silicon or other similar product for the
sealing material.
6
Remove the dome cover protective
sheet
Protective
sheet
Advertisement
Table of Contents
