Camera Output Settings - JVC LST0728-001B Instructions Manual

Camera Output Settings

You can assign external outputs specified on the [I/O Setup] screen
to a camera, such as sounding of a siren or switching on of lights.
● The assigned outputs can be triggered automatically when
motion is detected, or manually by pressing the output buttons.
● You can display the [Output Settings] screen by clicking the
[Outputs...] button on the [Camera Recording Administator]
screen (A Page 55).
[Output Settings] Screen
Specifying Output During Manual Control
You can specify outputs to be triggered manually using the output
button or from a list on the [Live] screen.
1
Select an output from the [All Output] list
2
Click the button between the [All Output]
and [On Manusl Control] lists
● Doing so copies the selected output to the [On Manusl
Control] list.
● You can use the Up/Down buttons at the top right corner
of the [On Manusl Control] list to move the selected output
upward/downward within the [On Manusl Control] list.
● To delete an output from the [On Manusl Control] list,
select the output and click the
Output] and [On Manusl Control] lists.
[Output Settings] Screen
button between the [All
Specifying Output via Motion Detection
You can specify outputs to be triggered automatically when motion
is detected.
1
Select an output from the [All Output] list
2
Click the button between the [All Output]
and [On Motion Detected] lists
● Doing so copies the selected output to the [On Motion
Detected] list.
● To delete an output from the [On Motion Detected] list,
select the output and click the
Output] and [On Motion Detected] lists.
[Output Settings] Screen
button between the [All