Setting Picture Quality - JVC LST0728-001B Instructions Manual

Basic Operation
Recording Camera Images
(continued)
Settings (continued)
Item
H
Exclude
Regions
Settings
Exclude Regions...
Region Color...
I
PTZ Preset
Positions...
J
Outputs...
K
Event
Notifications...
L
Image Quality...
Note :
● When the recording program (recording server) is operating, the [PTZ Preset Positions...] button is disabled. To stop the recording server
temporarily, press the [Service Manager...] button on the [Camera Record Setting] screen, followed by clicking the [Pause] button.
(A Page 84)
● Video images and audio sound are not recorded when the recording server is temporarily stopped. Display of live images on the surveillance
computer is also turned off.
● Even when Always is selected under [When to store images in database]D in the recording control mode, recording is not executed during
the interval when the [Scheduler...] is set to offline . (A Page 53)
● Clicking [Cancel] does not cancel the picture quality and settings that are specified on another screen.

Setting Picture Quality

Clicking the [Preview Image] button while you are adjusting the
camera settings enables you to view the effect of your settings.
1
Select [Camera Record Setting] from the main
menu
2
Select a camera from [Device Manager] and click
[Camera Settings]
● The [Camera Settings] screen appears.
3
Click [Image Quality...]
● The [Configure Device] screen appears.
Note :
● It is recommended that you set the picture quality to
approximately 24 KB (VGA). Specifying a higher image quality
may affect the sound and cause the frames to be dropped.
Preset Values
^
Enables you to specify the regions to exclude from motion detection. (A Page 104)
Not used.
^
Enables you to specify preset positions and patrolling.
When a configurable camera is selected, this button is displayed to the right of the
[Outputs...] button.
^
Enables you to specify output settings. (A Page 102)
^
Enables you to select events for triggering event notification. (A Page 102)
^
Enables you to specify the image resolution and picture quality. (A Page 58)
Description
Example of [Configure Device] Screen
Memo :
● The [Configure Device] screen may vary with cameras.
● Refer to the [Instruction Manual] of the respective cameras for
the setting items.