Table of Contents
Advertisement
INITIAL SETTINGS
11
EN
GUIDE Plus+
Before you can start using your GUIDE Plus+ system you must
first connect your television equipment properly and then
complete an on-screen setup process so that the GUIDE Plus+
system knows what equipment you have and which "Host
Channel" to use for your household.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
1
Press the GUIDE.
● The GUIDE Plus+ setup menu appears
● Language and Country setting are already input from the
JVC's initial setup.
2
Press selection keys to select "Postal Code" and press
number keys or selection keys to enter your postal code.
● The postal code you enter must be correct, and must
represent a postal code in the identified country. If it is not
correct or dose not match the country, you will receive no or
incorrect TV listings data.
● If you do not use an external receiver, leave the fields as-is,
with "None" indicated.
3
Press GUIDE to complete the setting
External Receiver Users
If you use an external receiver you will have to set it up for the
GUIDE Plus+ system as following.
1
Press selection keys to select "External Receiver 1", "2", or "3",
then press ENTER.
2
Press selection keys to select reception ("terrestrial", "cable"
or "satellite")
3
Press selection keys to select provider if applicable
4
Press selection keys to select the brand of your external
receiver
5
Identify which socket your external receiver is plugged into
("L-1" or "L-2")
● The unit will now try to communicate with your external receiver
via the G-LINK cable. The on-screen prompt will ask you if the
receiver has changed to a specified channel.
6
If the external receiver changed channel correctly, Press
selection keys to select "YES" and press ENTER.
7
Press GUIDE to complete the setting.
IMPORTANT:
If eternal receiver did not change channels, or if receiver brand is
not indicated in the on-screen list, refer to ALTERNATE SETUP.
®
Setup
Identify the GUIDE Plus+ Host Channel
The TV listings data available in the GUIDE Plus+ system is
distributed throughout Europe by selected broadcasters called
"Host Channel". It is important that your unit "identifies" the host
channel for your region and setup correctly.
List of Host Channels
Country/Region
Host
(Language)
Channels
Austria
Eurosport
Belgium (Flemish)
Music Factory
(TMF)
France
Canal +
Germany
Eurosport
Italy
Sport Italia
Netherlands
Music Factory
(TMF),
Eurosport
Spain
Tele 5
Switzerland
Eurosport
(German)
United Kingdom
ITV, Eurosport
In Order to Receive Data
1
Leave the unit in "STANDBY" overnight.
External Receiver Users
1
Leave your external receiver "ON" overnight.
2
Leave the unit in "STANDBY" overnight.
ALTERNATE SETUP
If your external receiver is not in the list or your external receiver
could not be controlled properly by the unit, please follow these
steps.
1
For External Receiver brand, select "None".
2
Press GUIDE to exit the set up menu.
3
Tune your external receiver to your "Host Channel"(See list of
Host Channels) and Leave it "ON" overnight.
4
The unit must be on "STANDBY" overnight.
The next day, go back into the GUIDE Plus+ setup menu.
● The new external receiver codes might have been added.
5
Select the brand of your external receiver.
Helpful Hints
Analog only
Analog only
Use TMF if you live
in Amsterdam,
Eindhoven or
Rotterdam
Analog only
ITV is analog only.
Use Eurosport if you
are a SKY subscriber
and you no longer
have a terrestrial
antenna available.
Advertisement
Table of Contents
