Table of Contents
Advertisement
Item
D
Polling
For some devices, the surveillance system
may need to check the status of their input
Frequenc
ports in order to detect whether input has been
y[1/10sec]
received. These regular status checks are
called polling .
The [Polling Frequency[1/10sec]] field enables
you to specify the interval between status
checks. Specify the interval in units of 1/10
seconds.
Memo :
● For I/O devices, it is highly recommended
that the polling frequency be shortened as
much as possible.
● Refer to the "Instruction Manual" of the I/O
device for devices that require polling.
Note :
● Do not alter these settings unless under special circumstances.
Altering the setting unnecessarily may cause the system to
malfunction. They need not be altered under normal
circumstances.
Precautions during alteration
● When using event audio, the [Transfer port] of [Event Audio
Setting]-[Communication setting] must coincide with the [Alert
Port] number. (A Page 131)
● It is also necessary to set the [Alert Port] to a different number
from the [Event receive port] of [Event Audio Setting]-
[Communication setting]. (A Page 131)
Configuring Event Buttons
Event buttons are used to manually trigger events from the [Live
Viewing] screen.
1
Click the [Event Buttons...] button on the
[Camera Recording Administator] screen
[Camera Recording Administator] Screen
Description
[Event Buttons...]
2
Select [Global] (apply to all cameras) or a
specific camera
3
Click [Add new event...] to add the event button
[Add New Event] Screen
Item
A
Button related
Displays the camera name for which the
event is specified. (This is a read-only
to
field.)
B
Manual event
For specifying a name for the event
button.
name
Memo :
● The following characters cannot be
C
E-Mail settings
Send e-mail if this
Select this check box to send an e-mail
event occurs
alert when the event button is clicked.
Include image from
Select this check box to attach the
camera
currently recorded images to the e-mail
when the event button is clicked. Select
a camera from the list below the check
box.
Memo :
● To specify a timer event for an event, select the event added in
3
Step
, and click [Add new event...].
2
3
A
B
C
Description
used as part of the event name.
< > & ^8217 ^8220 \ / : * ? | [ ]
Advertisement
Table of Contents
