Pan/Tilt Camera Connection And Control; The Example Of Connection With Tk-C676 Or Tk-C655 - JVC VR-609 Instructions Manual

3.3 Pan/Tilt Camera Connection and Control

It is possible to control the Pan/Tilt camera.
The Pan/Tilt camera supports RS-485 and is given an ID for parallel connection.
Easy to install from the menu screen and possible to control by using the Jog Shuttle.
Recommended Cameras:

3.3.1 The example of connection with TK-C676 or TK-C655

Linked with a power connection, control terminal connection, and video signal output
connection. The following figure is the example of connection with 9 sets of TK-C676 or
TK-C655.
TK-C676 or
TK-C655
MACHINE ID : 1
Switch 8 : OFF
(RX TERM)
TK-C676 or
TK-C655
MACHINE ID : 2
Switch 8 : OFF
(RX TERM)
TK-C676 or
TK-C655
MACHINE ID : 9
Switch 8 : ON
(RX TERM)
・Camera power connection.
・Control terminal connection (RS-485) : Please use a twisted-pair cable. Connect a
+terminal (TX+) / -terminal (TX-) of this equipment to the RX+ / RX-terminal of a
Pan/Tilt camera. The camera connected at the end should set-up a terminus
(Switch8 : ON).
・Video signal connection (Composite)
Manufacturer
JVC
JVC
Control signal cable
Coaxial cable
AC 24 V
power supply
AC 24 V
power supply
AC 24 V
power supply
DVR VR-609
-- 25 --
Model
TK-C676
TK-C655
VR-609
Monitor