Cable Connection - JVC Dome Camera TK-C205VP Instructions Manual

DOME CAMERA
CAMÉRA À DÔME
CÁMARA DOMO
TK-C205VP
To the person installing this device:
Read this manual carefully for instructions on how to install this device
correctly. Upon completion, give this manual to the customer.
Pour la personne en charge de l'installation de
ce appareil:
Lisez ce manuel attentivement pour savoir comment installer l'appareil
correctement. Une fois l'installation effectuée, donnez ce manuel à
l'utilisateur.
Al personal encargado de instalar este dispositivo:
Lea atentamente las instrucciones de este manual para la correcta
instalación de este dispositivo. Cuando termine, entregue este manual
al cliente.
Installation precautions
Précautions d'installation
Precauciones de instalación
(A)
LWT0242-001B-H
English
Fall prevention
• The ceiling to mount the camera has to be strong enough to support the weight of this
product.
If the ceiling is not strong enough, make sure to apply reinforcement to the ceiling
before installation.
• Be sure to tighten the screws or nuts securely, Insufficient tightening may cause the
unit to fall from its mount.
• To avoid unforeseen accidents, attach the safety cable. Otherwise, there is nothing to
prevent the camera from falling should it come loose.
8 mm
2 mm
Seal tape
12mm ( 15 /
Pipe
32
Safety cable
or less

Cable connection

Power Supply cable Coaxial cable
Attachment screws
Use screw size suitable for the mounting
holes (ø5 mm ( 3 / ")).
16
Connecting the safety cable
• To prevent dropping, connect the unit to a
")
sturdy location (ceiling slab or channel)
and safety cable.
• For the used safety cable, pay particular
caution to the length, strength, pull, mate-
rial (insulation), etc.
• Always use the M4 screws mounted on
the unit.
Do not cross the power supply cable and
coaxial cable.