Lan Cable Connection; Monitor Signal Output Terminal Connection; Connecting The Audio Signal Output Terminal (Vn-V26U Only) - JVC VN-V25U VN-V26U Instructions Manual

LAN Cable Connection

Connect the camera to a hub or computer using
a LAN cable.
Cable to use
● Shielded cable
● Length of 100 m or shorter
When connecting to a hub
Make use of a straight cable.
When connecting to a computer
Make use of a cross cable.
1
1
AC24V
AC24V
MONITOR
OUT
SEE INSTRUCTION MANUAL
MONITOR
CAUTION
: NEVER USE
OUT
DO NOT CONNECT TO THE TELEPHONE NETWORK
SEE INSTRUCTION MANUAL
CAUTION
: NEVER USE
DO NOT CONNECT TO THE TELEPHONE NETWORK
Caution:
● However, cross cables cannot be used with
some computer models. When connecting
VN-V25U/26U directly to a computer, check
the computer's LAN specifications in
advance.
Note:
● Make use of a Category 5 (or higher) cable
when 100BASE-TX is used.
● To distribute images to the network, set the
[MONITOR OUT] switch at the side of this
product to AOFFB.
[MONITOR OUT] Switch
MONITOR OUT
2
G 2 1 2 1
2 G
2 1 2 1
ALARM
ALARM
10BASE-T/
100BASE-TX
PoE AC 24V
AND AT THE SAME TIME
PUSH
10BASE-T/
100BASE-TX
PoE AC 24V
AND AT THE SAME TIME
PUSH
PAL OFF NTSC RESET
STATUS
IRIS
Monitor Signal Output Terminal
Connection
This terminal is used for adjusting the camera
angle during installation. Connect it to devices such
as a video monitor using a video cable (RCA).
1 2
AC24V
MONITOR
OUT
SEE INSTRUCTION MANUAL
CAUTION
: NEVER USE
DO NOT CONNECT TO THE TELEPHONE NETWORK
Caution:
● A longer cable extension distance causes
signals to be attenuated, image resolution to
deteriorate and noise to increase.
Note:
● Select the signal system for the monitor output
using the [MONITOR OUT] switch at the side of
this product. (ANTSCB or APALB)
After adjusting the camera angle, set the switch
to AOFFB. After changing the switch settings,
press the Reset button to reboot the camera.
Connecting the audio signal
output terminal (VN-V26U only)
Connect to the speakers with a built-in amplifier,
etc. using mini jack (R3.5 mono) cable.
1 2
AC24V
MONITOR
OUT
SEE INSTRUCTION MANUAL
CAUTION
PoE
: NEVER USE
DO NOT CONNECT TO THE TELEPHONE NETWORK
G 2 1 2 1
ALARM
10BASE-T/
100BASE-TX
PoE AC 24V
AND AT THE SAME TIME
PUSH
G 2 1 2 1
ALARM
AUDIO OUT
10BASE-T/
100BASE-TX
AC 24V
AND AT THE SAME TIME
PUSH
19