These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances. IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4.
● Consult the dealer or an experienced radio/TV EXPOSE THIS APPLIANCE TO technician for help. RAIN OR MOISTURE. CAUTION CHANGES APPROVED BY JVC COULD VOID USER’S AVERTISSEMENT: AUTHORITY TO OPERATE THE EQUIPMENT. POUR EVITER LES RISQUES D’INCENDIE OU D’ELECTRO- THIS DEVICE COMPLIES WITH PART 15 OF CUTION, NE PAS EXPOSER THE FCC RULES.
Isolated power supply only (E type) • The rating label is displayed on the bottom of the unit. • JVC will not be liable for any damage resulting from the camera dropping due to incomplete installation by not following the installation instructions. Take caution when performing installation.
Names and Operations of Parts Camera unit View when the dome and inner covers are removed. Head [D/N - ON/OFF] Easy Day & Night switch For adjusting the lens, focus, or camera To capture a subject with continually angle. changing brightness (day/night), set this page 14) switch to “ON.”...
Names and Operations of Parts Main unit bottom/side/top bottom side Safety cable installation screw Install the safety cable using this screw. Use screw size suitable for the mounting (Safety cable not included.) holes (ø5mm ( CAUTION Conduit hole To avoid unforeseen accidents, attach a Hole for installation to conduit hole pipe safety cable.
Installation and connection Mounting the Base Remove the camera unit from the base and mount the base to the pipe. • Do not remove the protective sheet affixed to the dome cover until installation work is completed. Removing the sheet during installation may result in scratching of the dome cover. Remove the dome cover from the Wrench base...
Installation and connection Connect the Cables to the Base Connect the coaxial cables and power supply cable to the terminals within the Base. • Turn OFF the power supply to all compornents before making connections. Video signal cables Fold back the net and insulate so that a short cir- cuit does not occur from the net coming apart.
Installation and connection Before Adjusting the Camera Press A and B lightly, and remove inner cover. The MONITOR terminal is used when making various adjustments to the camera at installa- tion. Setting switch Adjustment button Inner cover Open IRIS LEVEL Volume Tilt lock screws After making camera adjustments, attach the inner cover to ensure that the tilt lock screws fit into the holes (C).
Installation and connection When Installing the Camera Using the Conduit Hole (side) When installation cannot be made to the ceiling, use the conduit hole on the main unit side to install to the pipe. Follow steps 1 - 5 of Mounting the Base to the Ceiling.
Installation and connection When installing the camera to a ceiling without piping When installing the camera to a ceiling without piping, use all four mounting holes to attach the camera securely. Follow steps 1 - 3 of Mounting the Base to the Ceiling.
Others Others Specifications Signal system: Power requirement: U type based on NTSC standard E type based on PAL standard Image device: " IT CCD Power consumption: Effective picture elements: U type 380,000 pixels, 768 (H) × 494 (V) Mass: E type 440,000 pixels, Operating temperature: 752 (H) ×...
DOME CAMERA CAMÉRA À DÔME CÁMARA DOMO Installation precautions TK-C205VP Précautions d’installation Precauciones de instalación To the person installing this device: Read this manual carefully for instructions on how to install this device correctly. Upon completion, give this manual to the customer. Pour la personne en charge de l’installation de ce appareil: Lisez ce manuel attentivement pour savoir comment installer l’appareil...
Page 14
Dust and water prevention Attach the Dome cover • Be sure that dome cover is firmly attached. Attaching the dome improperly may cause moisture to enter and cloud the inside or result in the cover coming loose and fall- ing. •...