Client Bridge Mode; Wds Bridge Mode - EnGenius EOC5510 User Manual

Wireless long range access point / client bridge

Hide thumbs Also See for EOC5510:

Table of Contents

Step3

Step4

Auction: EOC5510's Access Point Mode does not provide DHCP server so the Wireless Client IP address must configure

manually at the same subnet in Local Area Network.

9.2 Client Bridge Mode

Client Bridge Mode functions like a wireless dongle. It must connect to an Access Point/AP Router to

join the network.

Please refer to the last section to check Access point's configuration.

Client Bridge

Step1

Step2

Step3

Step4

Step5

Step6

Step7

Step8

Auction: Client Bridge's IP setting must match to the Access Point's subnet.

Use this feature to link multiple APs in a network. All clients associated with any APs can

communicate each other like an ad-hoc mode.

to connect with or enter SSID manually.

Configure VLAN ID in your wireless device if available.

Select correct authentication type and password.

Select your country or region's regulation.

Select Operation Mode to Client Bridge from System Properties.

802.11a (5GHz) wireless network.

Use site survey to scan Access Points that are available in nearby area.

Select the AP you would like to associate with.

Setup the authentication settings that match to the Access Point's setting.

Press Apply to process all the configurations.

Table of Contents