Client Bridge; Wds Bridge - EnGenius EOC5510 User Manual

Wireless long range access point / client bridge

Hide thumbs Also See for EOC5510:

Table of Contents

2.3 Client Bridge

In the Client Bridge Mode, the EOC5510 function likes a wireless dongle. Connected to an Access

Point wirelessly and surf internet whenever you want. Using Site Survey to scan all the Access Point

within the range and configure its SSID and Security Password to associate with it. Connect you

station to the LAN port of the EOC5510 via Ethernet.

In the WDS Bridge Mode, the EOC5510 can wirelessly connect different LANs by just simply configure

each other's MAC Address and Security Settings. This mode is used when two wired LANs locate in

small distance and want to communicate each other. The best solution is using EOC5510 wirelessly

connect two wired LANs. WDS Bridge Mode can establish 16 WDS links. The connection diagram is

like a Star.

Auction: WDS Bridge Mode is not function like Access Point. APs linked by WDS are using the same

frequency channel, more APs connected together may lower throughput. Please be aware to avoid

loop connection, otherwise you may enable Spanning Tree Function.

Table of Contents