Table of Contents
Advertisement
MTU
IP Address
IP Subnet Mask
Gateway IP Address
PPTP Server
Username
Password
Connect on Demand
Keep Alive
Get Automatically From
ISP
Use These DNS Servers
Discard Ping on WAN
Apply / Cancel
Auction: If the router's MTU is set too high, packets will be fragmented downstream. If the router's
MTU is set too low, the router will fragment packets unnecessarily and in extreme cases may be
unable to establish some connections. In either case, network performance can suffer.
Specify the Maximum Transmit Unit size. Suggest remain in Auto.
Specify WAN port IP address.
Specify WAN IP Subnet Mask.
Specify WAN Gateway IP address.
Specify PPTP Server IP address.
Specify the Username that is given by your ISP.
Specify the Password that is given by your ISP.
Select the Radio button to specify the maximum idle time. Internet connection will
disconnect when it reach the maximum idle time, but it will automatically connect
when user tries to access the network.
Select the Radio button to keep internet connection always on. Specify the redial
period once the internet lose connection.
Select the Radio button for get the DNS automatically from DHCP server.
Select the Radio button for setup the Primary DNS and Secondary DNS servers
manually.
Place a Check to Enable or Disable ping from WAN.
Press Apply to apply the changes or Cancel to return previous settings.
41
Advertisement
Table of Contents
