Table of Contents
Advertisement
1.2 Benefits
Access Point Mode
Client Bridge Mode
WDS Bridge Mode
Client Router Mode
Multiple SSIDs
VLAN
QoS
Wi-Fi Protect Access
Use this feature to setup the access point's configuration information.
It has support adjusting transmit power and channel. Client can access
the network with different regulatory settings and automatically
change to the local regulations.
Use this feature to connect to an Access Point and enjoy the great
speed of surfing internet.
Use this feature to link multiple APs in a network, All clients associated
with any APs can communicate each other like an ad-hoc mode.
This feature functions completely opposite but similarly with AP
Router Mode. Client Router connected to an AP wirelessly and
transmit internet connection protocol through AP to access the
internet.
EOC5510 supports up to 4 SSIDs on your access point. The following
options can be set to each SS to each SSID:
SSID for public or private network
-
-
Authentication is fully supported
VLAN identifier
-
-
Radius accounting identifier
Profile isolation for infrastructure network
-
Specify a VLAN number for each SSID to separate the services among
clients.
Use this feature to limit the incoming or outgoing throughput.
Wi-Fi Protect Access is a standard-based interoperable security
enhancement that increases the level of data protection and access
control for existing and future wireless LAN system. It is compatible
with IEEE 802.11i standard WPA leverages TKIP and 802.1X for
authenticated key management.
5
Advertisement
Table of Contents
