Computer Settings; Assign A Static Ip - EnGenius EOC5510 User Manual

Wireless long range access point / client bridge

Hide thumbs Also See for EOC5510:

Table of Contents

3 Computer Settings

In order to configure EOC5510, please follow the instruction below:

1. In the Control Panel, double click Network

Connections and then double click on the connection of

your Network Interface Card (NIC). You will then see the

following screen.

2. Select Internet Protocol (TCP/IP) and then click on the

Properties button. This will allow you to configure the

TCP/IP settings of your PC/Notebook

3. Select Use the following IP address radio button and

then enter the IP address and subnet mask. Ensure that

the IP address and subnet mask are on the same subnet

as the device.

4. Click on the OK button to close this window, and then

close LAN properties window.

Auction: IP Address entered in the TCP/IP Properties needs to be at the same subnet of the EOC5510

IP Address. For example: EOC5510's default IP Address is 192.168.1.1 so the IP Address in the TCP/IP

settings could be 192.168.1.10.

Table of Contents