Cleaning The Cabinet - Cornelius QUEST ELITE 4000 Service Manual

Cleaning the Cabinet

© 2010-2014, Cornelius Inc.
The cabinet bottom surface and walls should be inspected and cleaned annually
according to the following steps:
1. Remove natural rubber nozzle bushing gasket (see Figure 17) and inspect it
and silicone RTV. If cracked, clean off RTV, and re-apply using kit P/N
729011013 per instructions provided with kit.
2. Re-apply nozzle bushing gasket so that the edges lie flat on the floor of the
cabinet.
Figure 17. Nozzle bushing gaskets - proper installation
3. Clean cabinet floor and walls of any spilled juice and let dry. Use a mild
soap/detergent and plain water.
4. Reinstall the pump platform in the reverse order given above.
- 19 -
Quest Elite 4000 Service Manual
Publication Number: 620048956SER