Operating The Unit Without Loading A Cassette Tape - Sony DSR-300 Service Manual

2-8. OPERATING THE UNIT WITHOUT
LOADING A CASSETTE TAPE
1. Turn off the power switch.
2. Remove the left panel and cassette compartment lid.
(Refer to section 2-2-1.)
3. Disconnect connector CN1 from the CC-68 board.
4. Set the SLACK DETECTION ON/OFF switch (S500-
4/SV-164 board) to off.
5. Turn on the power switch.
6. Press the desired mode button.
Note: Set the SLACK DETECTION ON/OFF switch
(S500-4/SV-164 board) to on, after operation.
DSR-300/P(E)/V1
CN1
CC-68 board
Cassette compartment
2-13