Switch Setting Before Adjustment; Notes On Adjustment - Sony DSR-300 Service Manual

7-1-3. Switch Setting before Adjustment

Switch setting for camera side
GAIN switch:
OUTPUT/DL/DCC+ switch: CAM/DCC+
WHITE BAL switch:
FILTER control:
SHUTTER switch:
ZEBRA switch:
HYPER GAIN switch:
EZ MODE switch:
MATRIX:
ATW:
IRIS (Lens):
ZOOM (Lens):
7-2
LOW (0 dB)
PRESET
1
OFF
OFF
OFF
OFF
STD
OFF
Manual
Manual

7-1-4. Notes on Adjustment

(1) Before adjustment, be sure to allow for 10-minute
warm-up time.
(2) When using the SERVICE menu, refer to "2-7.
SERVICE MODE OPERATION."
(3) Unless otherwise specified, the sentence "chart frame =
underscanned monitor frame" is written about the
shooting condition.
In this case, make sure that the lens is best focused.
Then adjust the zoom control of the lens so that the
chart frame touches the underscanned monitor frame.
Chart frame
Underscanned
monitor frame
W
W = 0
In case of the Grayscale chart:
(Underscanned monitor screen)
H
H
W
H = 0
H = 0
W = 0
DSR-300/P(E)/V1