Settings For System Operation; Settings At Installation; How To Open The Serviceman Menu（Service Man Menu - JRC JMA-9172-SA Instruction Manual

JMA-9172-SA Instruction Manual
7.1

SETTINGS AT INSTALLATION

This section describes the electrical adjustment procedures to be performed by
service engineers during system installation.
The bearing adjustment value is saved to non-volatile memory in the scanner.
Other settings are saviedto non-volatile memory in the radar process unit.
7.1.1 How to Open the Serviceman Menu（Service Man Menu）
Procedures
1) Hold down the
lower right of the display together
with the left key.
The Code Input menu will appear.
Left-click the
2)
3) Left-click the
The Serviceman Menu will appear.
>

7.SETTINGS FOR SYSTEM OPERATION

• Do not carry out the adjustments of the equipment
except authorized service persons. If wrong setting is
carried out, this may cause unstable operation.
• Do not carry out the adjustments during navigation.
Otherwise, the radar performance may be affected,
resulting in an accident or trouble.
button at the
Main
button.
0
button.
ENT
7－ 1
>
7.1 SETTINGS AT INSTALLATION
Fig 7-1:
Code Input
7