Language Setting (Language) - JRC JMA-9172-SA Instruction Manual

7.2.4.1 Slave Mode Setting (Master/Slave)
Procedures
1) Open the Serviceman Menu.
2) Perform the following menu open procedure to open the
installation setting menu.
Select Slave for the item
3)
7.2.4.2 Setting of Input Bearing Pulse (Input BP Pulse)
Procedures
Open the Serviceman Menu.
1)
Perform the following menu open procedure to open the second
2)
page of the installation setting menu.
→
3) Set the number of pulses for the item
menu.
7.2.5

Language Setting (Language)

The system is designed to switch between display languages, Japanese and
English.
Procedures
1) Open the Serviceman Menu.
>
JMA-9172-SA Instruction Manual
2. Installation Menu
:The system operates as radar equipment while the own
Master
antenna is connected.
:The system operates as a sub-display while the signal
Slave
cable of other radar equipment is connected.
2. Installation Menu
9. Next
： 2048 pulses per antenna rotation
2048
： 4096 pulses per antenna rotation
4096
7－ 17
7.SETTINGS FOR SYSTEM OPERATION
in the menu.
2. Master Slave
1. Input BP Count
>
7.2 SETTINGS
in the
7