XSARA - All Types
Old assembly
B3FP11BD
Fixing of the brake disc hub.
New components:
- Rear wheel stub.
- Double shouldered washer (ref. (7)).
NOTE : The new assembly is identified by a figure from 1 to 6 cold-stamped on the head of the wheel stub at "c".
Ref. "c". : Figure from 1 to 6 cold-stamped.
(5) Spacer without seal face.
(6) Sealed bearing incorporated at "b".
REAR BRAKE SPECIFICATIONS
Evolution : Rear brake disc hub 01/99 #
B3FP11CD
Evolutions
Sealing of the brake disc hub.
New components:
- Sealed bearing incorporated at "c" (ref. (6)).
- Spacer without seal face (ref. (5)).
- Cap (ref. (8)).
New assembly
(7) Double shouldered washer, exterior diameter = 48 mm.)
(8) Cap.
312
New assembly