CITROEN 2001 BERLINGO Handbook page 191

CHECKING AND SETTING THE DELPHI MECHANICAL INJECTION PUMP
B1HPOL6C B1HPON9C
4093-T
Rep :
1 Peg
- Flywheel locating peg : 7014-T.J.Tool kit 7004-T
2 Bracket
- Bracket and peg
3 Dial gauge
4 Flat end
5 Relay lever
- Peg engaged: The dial gauge should read "X" ± 0.03 engraved on the pump.
- If not, check the timing again.
- Insert the peg (1) into the pump
- The peg must be against the guide tube "a". (If not, turn the engine backwards).
- Fit the tool 4093-T.
- Set the dial gauge to "0".
- When the dial gauge starts to move, it signifies that the piston is nearing TDC.
- Peg the flywheel.
- Slowly turn the pump toward the engine until measurement "X" can be seen.
("X" = Value engraved on each pump).
187
Engines : DHY
TOOLS
: 4093-T Tool kit 4123-T
CHECKING THE PUMP
SETTING THE PUMP
XSARA