Preliminary Conditions; Accelerator Cable Adjustment; Kick Down Cable Adjustment - CITROEN 2001 BERLINGO Handbook

4 HP 14 AUTOMATIC GEARBOX - CHECKS AND ADJUSTMENTS
Checks - Adjustments : Kick down cable
- Engine hot.
- Idling speed correct.
- Automatic cold start device out of action (according to equipment).
- Remove the kick down cable (1) from the throttle quadrant.
- Pull out the sheath stop (2) and fit the spring clip (3) so as to obtain a small
clearance.
- Press the accelerator pedal fully down.
- Ensure that the throttle is fully open.
- Pull the cable until the point of resistance.
(Start of kick down command A = 39 mm).
- The lug (4) must be positioned and crimped on the cable.
- Refit the kick down cable (1) on the throttle quadrant.
- Adjust the clearance (B) from 0.5 mm to 1 mm max. by tightening the nuts (5).
B2CP35GC B2CP35HC
Engine : RFV

Preliminary conditions :

Accelerator cable adjustment :

Kick down cable adjustment:

249
B2CP35JC B2CP35KC
XSARA