CHECKING AND SETTING THE BOSCH MECHANICAL INJECTION PUMP
XSARA
Engine : DHY
TOOLS
Flywheel setting peg
: 7017-T.R
Tool kit 7004-T
Checking the injection pump.
- Remove the tool 7017-T.R.
- Rotate the crankshaft (direction of rotation).
- Peg the flywheel.
- In this position, the dial gauge should show the value ''X'' (See the table on page : 197).
- The value ''X'' corresponds to the travel of the pump piston in relation to the BDC.
- Remove the tool.
B1HP0NQC
B1HP0NPC
200