Kyocera FS-1350DN Service Manual page 36

2H4
Service items
No. Items
cont.
1-3-12
(a) Cause of paper jam
10: Paper does not arrive at the registration sensor. [42] (MP tray)
10: Paper does not arrive at the registration sensor. [31] (Cassette 1)
10: Paper does not arrive at the registration sensor. [31] (Cassette 2)
10: Paper does not arrive at the registration sensor. [31] (Cassette 3)
10: Paper does not arrive at the registration sensor. [49] (Duplex conveying)
11: Paper does not pass the registration sensor. [48]
12: Paper remains at the registration sensor when power is turned on. [48]
20: Paper does not arrive at the exit sensor. [48]
21: Paper does not pass the exit sensor. [47]
22: Paper remains at the exit sensor when power is turned on. [47]
30: Paper does not arrive at the paper feeder 1's PF paper feed sensor. [32](Cassette 2)
30: Paper does not arrive at the paper feeder 1's PF paper feed sensor. [33] (Cassette 3)
31: Paper does not arrive at the paper feeder 1's PF paper feed sensor. [32] (Cassette 2)
32: Paper remains at the paper feeder 1's PF paper feed sensor when power is turned on.
[32] (Cassette 2)
40: Paper does not arrive at the paper feeder 2's PF paper feed sensor. [33] (Cassette 3)
41: Paper does not pass the paper feeder 2's PF paper sensor. [33] (Cassette 3)
42: Paper remains at the paper feeder 2's PF paper feed sensor when power is turned on.
[33] (Cassette 3)
A1: Paper does not arrive at the exit sensor. [47]
A3: Paper does not pass the exit sensor. [49]
E0: Paper misfeed occurs due to forced stop when an error occurs during printing. (such as
opening of a cover) [00]
F0 to FE: Paper misfeed by another cause. [00]
Note:
Within [ ] indicate paper misfeed locations. (Refer to figure 1-3-6 below.)
(b) Detail of jam location
47
4
Paper feeder 1
Paper feeder 2
Description
Description
Printer
48
2
49
1
5
6
5
6
Figure 1-3-6
1
42
3
2
3
Exit sensor
4
PF paper feed sensor
5
31
PF paper sensor
6
Paper misfeed locations
32
31
Cassette 1 (Printer)
32 Cassette 2 (Paper feeder 1)
33 Cassette 3 (Paper feeder 2)
MP tray
42
33
Fuser/paper exit section
47
Printer inside
48
Duplex/conveying section
49
Sensors
Registration
sensor
Paper sensor
MP paper
sensor