Sealing The Air Filter Box; Removing The Main Silencer; Installing The Main Silencer - KTM 125 EXC EU Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.29

Sealing the air filter box

11.30

Removing the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
11.31

Installing the main silencer

Main work
–
Wash the air filter thoroughly in special cleaning liquid and allow it to dry properly.
Air filter cleaner (
Info
Only squeeze the air filter to dry it; never wring it out.
–
Oil the dry air filter with a high quality filter oil.
Oil for foam air filter (
S00044-10
–
Clean the air filter box.
–
Clean the intake flange and check it for damage and tightness.
Finishing work
–
Install the air filter.
–
Install the air filter box lid. (
x
–
Seal the air filter box in the marked area
401527-10
–
Remove screws
–
Pull the main silencer off of the manifold at the rubber sleeve
B00821-10
–
Mount the main silencer with rubber sleeve
–
Mount and tighten screws
Guideline
Remaining screws, chassis
B00821-11
p. 131)
p. 132)
( p. 59)
x
p. 58)
A
.
1
.
2
.
.
2
.
1
M6 10 Nm (7.4 lbf ft)
60