Connecting A Pc - Sharp Aquas LC-52LE920UN Operation Manual

Connecting to External Equipment
Connecting a PC
Refer to page 51 for a list of PC signals compatible with the N.
• When using HOMI cable (HOMI 1, 2, 3 or 4):
Back panel
vertical inputs
ARC
ill
HOMI-certified cable
,
,,.....------~~~
f - - - _.....
".~\ l2tiF~9
m
"'I~
I
~
J
I
C ; ; ; l J ! ) ; ; ~
; ;;;H;;i:J;;m;;I;)1
• Depending on the board, only video signals may be output. In this case, in addition to connecting an HOMI-certified cable
to the HDMI 1 terminal, connect a 0 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to
"HDMI+Analog". (See page 51 .)
• The HDMI terminals only support digital signal.
• When using OVI-HOMI conversion cable (HOMI1):
I@l
~
ill
Hi:Jml
i
I
• When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVI-HDMI conversion cable to the HDMI 1 terminal, connect a 0 3.5 mm stereo minijack cable to the AUDIO IN
terminal and set "Audio Select" to "HDMI+Analog". (See page 51.)
• When using analog RGB cable (PC IN):
Back panel
vertical inputs
Em
• When using an analog RGB cable, input the audio signal to the AUDIO IN terminal of PC IN.
• When connecting a PC to the PC IN, set "Audio Select" to "Video+Audio". (See page 51.)
@-
16