Connecting A Digital Tv Decoder (Set Top Box); Connecting A Pc; Using Digital Audio Output - Sharp AQUOSLC-42GX3H Operation Manual

Preparation

Connecting a Digital TV Decoder (Set Top Box)

You can use the INPUT 1/INPUT 2 (component) or INPUT 4/INPUT 5/INPUT 6 (HDMI) terminals when connecting
to a Digital TV Decoder (Set Top Box) and other audiovisual equipment.
NOTE
• When using a DVI-HDMI conversion adaptor, input the Audio Signal from the AUDIO terminal of INPUT 6. (See page 36.)
When using HDMI cable
(commercially available)
Digital TV Decoder
(Set Top Box)
Ø3.5 mm stereo
minijack

Connecting a PC

You can use the INPUT 7 (PC) terminals when
connecting to a PC. (See page 39.)
RGB cable
(commercially
ANALOGUE
RGB
available)
AUDIO
Ø 3.5 mm
(R/L)
stereo minijack
cable(commercially
PC
available)
10
When using component cable
(commercially available)
R – AUDIO – L
Digital TV Decoder
(Set Top Box)

Using Digital Audio Output

It is possible to output audio through the DIGITAL
AUDIO OUTPUT terminal. PCM audio outputs from the
terminal.
Optical fi bre cable
(commercially available)
To optical digital input of external audio devices
NOTE
• The DIGITAL AUDIO OUTPUT terminal usually outputs the
same audio from the speakers. (The audio of the content
you are viewing is output from the terminal.)
• The DIGITAL AUDIO OUTPUT terminal does not output
some signals, depending on devices and software.
Y P P
B R
(C ) (C )
B R