Sharp Aquas LC-52LE920UN Operation Manual page 48

Using AQUaS LINK
AQUaS LINK Setup
mm
• If the TV audio cannot be output from the AV amplifier even
after making the necessary settings, connect the TV 10 the
AV amplifier with an optical fiber cable and select "Off".
Chanriel'SjJ~KeL.l·
;o.;,,;,;;,,_ _
IIi1imllm
This function can be set for each input terminal.
On:
The remote control unit of the TV can be used to
select the channel, display program informaticn, and
perform other operations of a connected AQUOS
LINK-compatible recorder.
Off: This function does not work.
Audio
Returna"neI':.:..;._ _............
This function allows you to listen to the 1V audio Ilia
audio equipment without using an optical fiber cable,
which conventionally is required.
Requirements for using an ARC-compatible AV
amplifier:
• ARC-compatible AV amplifier connected to the ARC-
compatible HOMI terminal (HOMI 1).
(Refer to the operation manual of the
ARC-compatibIE~
equipment for details.)
• Use of an ARC-compatible cable.
Auto: You can listen to the TV audio with ARC-
compatible audio equipment.
Off: This function does not work.
AQUaS
NET APPS
:.~.
o
0
Menu
Audio Return Channel
{Auto)
[Yes)
Auto Power On
Selecting Recorder
Example
[On)
Channel Select Key
System
Options
System Options
AQUaS LINK Setup
AQUaS LINK Control
1
Press MENU to display the MENU screen, and then
press ..... /~ to select "System Options".
2
Press
J;..!~
to select "AQUOS LINK Setup", and
then press ENTER.
3
Press
J;..!~
to select a specific item, and then press
ENTER.
4
Press
J;./~
(or .....
/~
) to select the desired setting,
and then press ENTER.
5
Press MENU to exit.
~Q.uOS
UNKCOOtroI·
Select AQUOS LINK Control to disable AQUOS LINK
function even when an AQUOS LINK-compatible HOMI
device is connected to the 1V. This function prevents
the device from starting to operate unexpectedly.
On:
You can operate AQUaS LINK-compatible
equipment.
Off: AQUaS LINK function does not work.
·A~ Pqy!e1iQaii~~t.~·:~··
.
If this is activated, the One Touch Play function is
enabled.
Yes: While the TV is in standby mode, it automatically
turns on and plays back the image from the HOMI
source.
No: This function does not work.
..
s electlng~J:llc!Sldie~'!'
r \::.
When multiple AQUOS LINK-compatible devices are
connected, this function allows you to set the recorder
for recording when you press eREC on the 1V's
remote control unit.
Press
J;./~
to select the recorder for recording.
mm
• When an AQUOS LINK-compatible audio system or other
equipment is connected between the TV and recorder,
"Sub" is displayed.
®-
47