Watching Tv; Turning On/Off The Power; Initial Installation - Sharp Aquas LC-52LE920UN Operation Manual

Watching TV
Turning On/Off the Power
Initial Installation
DISPLAY
j~8~~~,
CJ CJ
TV Location
Select "Home" or "Store" for the location where
you plan to install the TV. This product qualifies for
ENERGY STAR in Home mode default setting.
2
Press .....
/~
to select "Home" or "Store".
Press ENTER to enter the setting.
Home: "Power Saving" is set to "Advanced", and AV
MODE is set to "STANDARD".
Store: "Power Saving" is set to "Off" and AV MODE s set to
"DYNAMIC (Fixed)". Picture Reset and Feature Demo can
be set.
Picture Reset: AV MODE will be set to "DYNAMIC (Fi):ed)"
regardless of whether Picture Reset is "On" or "Off". If you
select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if
there is no operation for 30 minutes. When "Off" is sE·lected,
AV MODE will be set to "DYNAMIC (Fixed)".
Feature Demo: When "On" is selected, after all the settings
are completed, the Feature Demo screen is displayed if there
is no operation for several minutes.
MUTE
~ ~o
INPUT
o
VOL CH '
- V
~1i.~RETURN
o
0
Language (Language setting)
Select from among 3 languages: English, French and
Spanish.
1
Press
Ji./""
to select the desired language Ided
on the screen, and then press ENTER.
When you turn on the TV for the first time, it will
automatically memorize the broadcasting channels
available in the region where you live. Perform the
following steps before you press POWER on the
remote control unit.
1. Insert the batteries into the remote control unit. (See page 9.)
2. Connect the antenna cable to the 1V. (See page 9)
3. Plug in the AC cord to the AC outlet. (See page 8.)
POWER (On/Standby)
1 - - -
POWER
II
.... • _ .REC
CJ CJ CJ CJ
OPTION SLEEP
~st~~
FREEZE
CJ
CJ CJ
CJ
• If you are not going to use this 1V for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Weak electric power is still consumed even when the 1V is
turned off.
TV STB DVD'VCR AUDIO
CJ CJ CJ CJ
. . . . . . . . II
CJ CJ CJ CJ
• The Initial Installation starts when the 1V powers on for the
first time. If the 1V has been turned on before, the Initial
Installation will not be invoked. For changing the settings of
the Initial Installation, perform "EZ setup" on the Initial Setup
menu on page 32.
Press POWER on the TV or on the remote control unit
again to turn the power off.
• The 1V enters standby and the image on the screen
disappears.
Press POWER on the TV or on the remote control unit
to turn the power on.
• ENERGY STAR qualification is based on AV MODE
"STANDARD".
@-17