Preparation
Connecting HDMI equipment
You can use the INPUT 3 terminal when connecting HDMI equipment.
• When using an HDMI-DVI conversion cable, input the audio signal to AUDIO terminal of INPUT 3.
• When receiving an incompatible signal, such as 1080p, the message below appears without the image on the screen.
For an incompatible video signal: "Not compatible with this signal."
Connecting a PC
When connecting to a PC with an analog RGB terminal. (INPUT 4)
ANALOG
RGB
( PC IN )
PC compatibility chart
It is necessary to set the PC correctly to display XGA and WXGA signal. Refer to page 40 to set PC input signals.
PC
Resolution
DDC is a registered trademark of Video Electronics Standards Association.
Power Management is a registered trademark of Sun Microsystems, Inc.
VGA and XGA are registered trademarks of International Business Machines Corp.
This manual downloaded from http://www.manualowl.com
HDMI-certifi ed cable
(commercially available)
HDMI equipment
Ø 3.5 mm stereo minijack cable
(commercially available)
RGB cable
(commercially available)
Horizontal Frequency
PC
Vertical Frequency
VESA Standard
15