Sony DCM-M1 Service Manual page 164

3. Hyper Terminal Setting
1) Double-click [Hypertrm.exe] in the Hyper Terminal folder of
the personal computer.
2) On the [Connection Description] screen, enter the name "DCM-
M1" and select the icon, and then click [OK].
Fig.7-2-2
Select [Direct to Com1] for the Connect using: and click [OK].
If Com1 port has been used, select [Direct to Com2].
Fig.7-2-3
3) On the [Port Settings] screen, set the following and click [OK].
Bits per second: 57600
Data bits: 8
Parity: None
Stop bit: 1
Flow control: Xon/Xoff
4) From the File on the menu bar, click the Properties to select
the Settings screen.
Next, click [ASCII Setup] on the Settings screen.
– 24 –
Fig.7-2-4
Fig.7-2-5