Setting Station On/Off Options - Samsung OfficeServ 500 User Instruction

OfficeServ 500
TECHNICAL MANUAL

1.12 SETTING STATION ON/OFF OPTIONS

The OfficeServ 500 allows the system administrator to set any of the keyset features
listed below.
AUTO HOLD
00
01 AUTO TIMER
02 HEADSET USE
03 HOT KEYPAD
04 KEY TONE
05 PAGE REJOIN
06 RING PREF.
07 NOT FOR USA
08 AUTO CAMP-ON
09 NOT FOR USA
10 AME PSWD
11 DISP SPD NAME
12 CID REVIEW ALL
FEATURES
Automatically places an existing C.O. call
on hold if a CALL button, trunk key or trunk
route key is pressed during that call.
Automatically starts the stopwatch timer
during a C.O. call.
When
hookswitch allowing a headset user to
answer all calls by pressing the ANS/RLS
button.
When ON, this feature allows the user to
dial directory numbers without having to
first lift the handset or press the SPK button.
Allows the user to hear a slight tone when
pressing buttons on keyset.
Allows the user to hear the latter part of
page announcements if keyset becomes
free during a page.
When OFF, requires the user to press the
fast flashing button to answer a ringing call
after lifting the handset.
This field is reserved and can not be used
for U.S. software.
Keyset users can allow intercom calls to
camp-on to other keysets without having to
press a CAMP-ON key.
If this option is set to YES, station users
who have AME set must enter their station
password to listen to messages being left.
If this option is set to ON the user will have
the name associated with the speed dial
number shown in the display after the
number has been dialed.
If this setting is set to OFF the CID review
list will only store CID information for calls
that were not answered at the station and
reject the information for calls that were
answered.
1.16
Home Page
USER INSTRUCTIONS
PART 1 MARCH 2004
DESCRIPTION
ON, this feature disables
Table of Contents
the