Yield Items And Service Maintenance - Ricoh M095 Service Manual

1.4.2 YIELD ITEMS AND SERVICE MAINTENANCE

The machine default setting will show the messages "Replace Soon" at the near end condition
and "Replace Now" at the end condition for yield parts. However, you can select the preferred
machine action at near end and end for yield parts using SP mode "PM Parts Rep Notice" as
shown in the following table.
There are 4 settings (0 to 3):
Sets whether to display the PM parts replacement notice and whether
to stop the engine.
0
PM Parts Rep
1
Notice
2 (default)
3
Item
Image Transfer Unit
Fusing Unit
Transfer Roller
SM Appendix
At near end: No Notice / Not Stopped
At life end: Notice "Replace Now" / Not Stopped
At near end: No Notice / Not Stopped
At life end: No Notice / Not Stopped
At near end: Notice / Not Stopped
At life end: Notice "Replace Now" / Not Stopped
At near end: Notice "Replace Soon" / Not Stopped
At life end: Notice "Replace Now" / Stopped
Yield
90 K
90 K
90 K
1-21
Preventive Maintenance
M095/M096/M099/M100