Ricoh M095 Service Manual page 165

Horiz Bypass
Tray
Vert Bypass
Tray
Horiz.Dup Back
Vert.Dup Back
This clears all counters except "Full Color" and "Black and White" in
the total counter.
Init Engine
When you execute "Init Engine EEPROM", the engine EEPROM is
EEPROM
initialized.
Turn the machine power off/on after you change this setting.
Displays only
PE-P2a / MF3a
Model PE-P2c / MF3c
Displays the current model in a dropdown list.
Do not change this setting (Designed for Factory Use).
00* – 7F
Brand ID Displays the current brand ID number.
Do not change this setting (Designed for Factory Use).
00* – 7F
Maintenance ID Displays the current maintenance ID number.
Do not change this setting (Designed for Factory Use).
SM
Adjusts the horizontal registration for the bypass
tray. If the machine settings are reset to the factory
defaults, this value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Adjusts the vertical registration for the bypass tray.
If the machine settings are reset to the factory
defaults, this value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Adjusts the horizontal registration for the back side
in duplex mode. If the machine settings are reset
to the factory defaults, this value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Adjusts the vertical registration for the back side in
duplex mode. If the machine settings are reset to
the factory defaults, this value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
5-25
Service Menu
M095/M096/M099/M100