Ricoh M095 Service Manual page 164

Service Menu
Sets the destination and updates the engine setting.
Destination
DOM/ NA (Default)/ EU/ CHIN/ TAIWAN/ ASIA
Media Type
2nd Transfer
2nd Transfer
Front
Fuser Temp.
2nd Transfer
Back
Fuser
Temperature
Horiz. Tray1
Vert.Tray1
Registration
Horiz.Tray2
Vert.Tray2
M095/M096/M099/M100
Sets the Media type.
Thin Paper / Thick Paper / Plain Paper1 / Plain
Paper2 / Recycled / Color / Letterhead / Preprinted
/ Prepunched / Label Paper / Bond Paper /
Cardstock / Envelope / Thick Post / Thinner Paper
Adjusts the transfer roller current, based on the
default value.
[-15 to 15 / 0 (Default) / 1 A/step]
Adjusts the transfer roller current, based on the
default value.
[-15 to 15 / 0 (Default) / 1 A/step]
Adjusts the temperature of the fusing unit, based
on the default value.
[-30 to 0 / 0 (Default) / 2°C/step]
Adjusts the horizontal registration for tray 1. If the
machine settings are reset to the factory defaults,
this value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Adjusts the vertical registration for tray 1. If the
machine settings are reset to the factory defaults,
this value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Adjusts the horizontal registration for tray 2. If the
machine settings are reset to the factory defaults,
this value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Adjusts the vertical registration for tray 2. If the
machine settings are reset to the factory defaults,
this value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
5-24 SM