Operation; Pressure Relief Procedure; Startup; Shutdown - Graco Pro Xp 3A2494D Instructions Manual

Operation

Operation Operation
Pressure Relief Relief Procedure Procedure
Pressure Pressure Relief Procedure
1. Turn OFF (O) the ES On/Off switch.
2. Turn off the air bleed valves to the fluid source
and to the gun.
3. Trigger the gun into a grounded metal waste
container to relieve the fluid pressure.
3A2494D
4. Open the pump drain valve, having a waste
container ready to catch the drainage. Leave
the pump drain valve open until you are ready
to spray again.
5. If the nozzle or hose is completely clogged or
pressure is not fully relieved, slowly loosen the
hose end coupling. Now clear the nozzle or hose.

Startup

Startup Startup
Follow all steps under Gun Setup Checklist, page

Shutdown

Shutdown Shutdown
1. Flush the gun, see
2. Follow the Pressure Relief Procedure, page
3. Hang the gun from its hook, with the nozzle
pointing down.
Operation
Flushing, page 28.
18.
27.
27