Belt Clip & Optional Cordless Handset - AT&T TL86103 User Manual

Getting started
Belt clip & optional cordless handset
For handsfree telephone conversations, you can use any industry standard
2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm
headset. To purchase a headset, visit our website at
www.telephones.att.com
Plug a 2.5 mm headset (not
included) into the jack on the
side of handset (beneath the
small plastic cover).
To attach the belt clip:
Snap the belt clip into
the slots on both sides
of the cordless handset,
as shown in the figure.
or call
1 (866) 288-4268
Lift the plastic
cover here.
Side of handset
17
To remove the belt clip:
Gently lift either of the
belt clip tabs, shown in
the figure, outwards to
remove the belt clip from
the handset.
.