Answer On/Off - AT&T TL86103 User Manual

Answering system
Answering system settings

Answer on/off

Unless you change it, the answering system is on and ready to record
messages. You can turn the answering system off, but if you do so, the
answering system does not answer calls and record incoming messages.
To turn the answering system on or off:
Using the telephone base:
Press /LINE 1 ANS ON/OFF
turn the corresponding answering system on or off. If the
answering system is turned on, it announces, "Calls will be
answered." If the answering system is turned off,
it announces, "Calls will not be answered."
-OR-
1. When the telephone base is in idle mode, press
to enter the main menu.
2. Press SELECT
Press CID, DIR, /RECORD, or /DELETE to
3.
highlight Mailbox 1 or Mailbox 2, and then
press SELECT
CID, DIR, /RECORD, or /DELETE
4. Press
highlight Answer ON/OFF, and then press
CID, DIR, /RECORD, or /DELETE
5. Press
highlight On or Off, and then press
the setting. You hear a confirmation tone.
NOTE: If the answering system is off and there is an incoming call, the system answers after
ten rings and announces, "Please enter your remote access code." For more information
about remote access, see page 123.
or /LINE 2 ANS ON/OFF
to select Answering system.
.
to
MENU
to
SELECT .
to
SELECT
to save
109
Play messages
Answering system
Directory
Cal ler ID log
p
SELECT
BACK
q
ANSWERING SYSTEM
Delete al l old
Record memo
Answer ON/OFF
p
SELECT
BACK
q
ANSWER ON/OFF
On
Off
p
SELECT
BACK
q