Super Vhs Et - JVC HR-DVS2U Instructions Manual

Mini dv/s-vhs video cassette recorder
Hide thumbs Also See for HR-DVS2U:
Table of Contents

Advertisement

Super VHS ET

Your VCR is equipped with Super VHS ET that makes it possible
to record with S-VHS picture quality on VHS cassettes.
ENGAGE S-VHS ET MODE
1
Press S-VHS ET on the VCR. You can check the current
setting ("S-VHS ET : ON" or "S-VHS ET : OFF") if
"SUPERIMPOSE" is set to "ON" (
: OFF" appears on the TV screen, press S-VHS ET again
in about 5 seconds to set it to "ON".
The S-VHS indicator lights up on the front display
panel.
NOTES:
You cannot activate the S-VHS ET function...
...while recording is in progress.
...while timer-recording (incl. Instant Timer Recording
pg. 49) is in progress.
...while Video Calibration (
...when the VCR's power is off.
S-VHS ET does not work with S-VHS tapes.
(VHS deck only)
pg. 27). If "S-VHS ET
pg. 34) is in progress.
S-VHS ET
This facility allows recording with S-VHS picture quality on
VHS cassettes. You can play back those cassettes recorded
in S-VHS ET on a VCR equipped with S-VHS ET.
NOTES:
To obtain the highest quality recording and playback
pictures over a longer period on this model, S-VHS
recording on S-VHS tape is recommended.
You can play back S-VHS ET recordings not only on this
VCR but also on another VHS VCR equipped with S-VHS
ET.
* It is recommended to specifically label S-VHS ET
recordings so you can easily distinguish them from
regular VHS recordings.
S-VHS ET recordings can also be played back on an S-
VHS VCR or a VHS VCR equipped with SQPB (S-VHS
QUASI PLAYBACK) function. However, there may be
cases where S-VHS ET playback is not possible on a
particular VCR.
Frequent still, frame-by-frame and slow-motion playback
may damage the tape and cause picture degradation.
With some tapes, better picture quality may not be
obtained even with S-VHS ET recording. It is recom-
mended that you do test record beforehand to make sure
whether better results can be obtained.
High Grade tapes are recommended for superior results.
Make sure that "VIDEO CALIBRATION" is set to "ON" at
the Function screen (
pg. 34).
During S-VHS ET playback, noise may appear depending
on tape quality.
Noise may appear during still, frame-by-frame and slow-
motion playback.
If the playback picture becomes blurred or interrupted,
use a cleaning cassette.
39
EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sr-vs20u

Table of Contents