Starting The Heater For The First Time; Turning The Heater On And Off; Adjusting The Flame Height - Lopi Heritage-2000 Owner's Manual

22

Starting the Heater for the First Time

Cleaning Gold Surfaces
Fingerprints or other marks left on gold surfaces may become etched in place if they are not wiped
clean prior to turning the stove on. With the heater cool, clean gold surfaces with denatured alcohol
and a soft cloth.
Fumes from the Painted Surfaces Curing
Burn the heater at a medium setting for approximately one hour the first time. This will cure the
painted surfaces. Fumes from the paint curing and oil burning off the steel may occur. This is
normal. We recommend you open the window to vent the room.
Condensation
Water may appear on the glass each time you start the heater - this is normal.
Blue Flames
The flames will be blue when first started. After fifteen minutes the flames will turn a more realistic
yellow and orange color.

Turning the Heater On and Off

After the pilot has been started...
Use this switch to
turn the main burner
on and off manually.
Warning: Do not place combustible items on top or directly in front of the heater, even temporarily.
The optional thermostat may start the heater causing a combustible item to ignite.
N o t e : If the heater turns on and off frequently while using the thermostat, you may want to
adjust the flame height down until it produces just enough heat needed.

Adjusting the Flame Height

Your heater has an adjustable flame to tailor the look and heat output to your specific needs. It is
adjusted by turning the middle dial on the gas control valve.
Travis Industries
Operation
See the instructions included
with the remote for details on
operation.
O
O
See the instructions
included with the
remote for changing
the battery.
Flame Height
Adjustment Knob
Turn counter-clockwise to adjust the flame higher, clockwise to lower.
Index Mark
9 3 5 0 8 1 2 1
For systems with wall
thermostats, use this switch to
control the temperature (right
is hotter, left cooler). Some
systems require the on/off
switch to be on.
2 3 1 0 0 0