Xerox WORKCENTRE 3119 Service Manual page 75

CIS. Release the CIS in the direction of
the arrow, Figure 10.
Figure 10
13. Remove the Belt Clip with a screwdriver to
release the Scanner Belt, Figure 11.
Figure 11
Note: Take note of the position of the notch to
ensure correct replacement when fitting the
Scanner Belt into the Carriage.
WorkCentre 3119
14. Remove the CIS shaft, 3 screws, then the
Scan Motor Assembly, Figure 12.
15. Remove the Spring then the Idle Bracket
in the direction of the arrow, Figure 13.
06/06
Repairs/Adjustments
Figure 12
Figure 13
4-11