Xerox WORKCENTRE 3119 Service Manual page 148

General Procedures and Information
1. Open the front cover and lightly push down on the cartridge then pull to take it out.
2. Remove the jammed paper by gently pulling it straight out.
3. Replace the toner cartridge and close the front cover. Printing automatically resumes.
In the Bypass Feeder
Bypass Jam appears on the display when you try to print using the bypass feeder and the machine
does not detect paper, due to no paper or improper paper loading. The error message may also
6-38
Figure 7
Figure 8
06/06 WorkCentre 3119