Assembling The Front And Surround Speakers - JVC SP-PWR1 Instructions Manual

INSTALLING YOUR NEW UNIT
Assembling The Front And Surround
Speakers
The following procedure explains the front speaker assembly. The
assembly of both the front and surround speakers are done in the
same manner.
Front speaker Surround speaker
(x2)
Before assembling^
●
Prepare a Phillips screwdriver (not supplied).
●
Take care not to drop any component part while assembling;
otherwise, it may cause damage to the floor or injury.
1
Black
Stand
2
Speaker
Stand
13
Stand (x4)
(x2)
Red White
Black
3
Red
Black
Speaker
Stand
When installing the front and surround speakers on the wall;
●
Attach the supplied bottom cover on the bottom of each speakers
as illustrated.
Bottom
cover
●
Be sure to have them installed on the wall by a qualified
personnel.
●
DO NOT install the satellite speakers on the wall by yourself to
avoid unexpected damage from their falling off the wall due to
incorrect installation or weakness in wall structure.
●
Care must be taken in selecting a location for speaker installation
on a wall. Injury to personnel or damage to equipment may result
if the speakers installed interfere with daily activities.
●
If attaching the stand to the speaker, remove the bottom cover by
inserting a flat-pointed tool into the hole of the bottom cover.
This page is for TH-R3
White
Black
Screw (supplied)