Other Problems
The image of the TV broadcast appears distorted on the TV
screen.
] Press PROGRESSIVE SCAN for 3 or more seconds so that the
Video output indicator (q) lights off on the front display panel.
Whistling or howling is heard from the TV during camcorder
recording.
●
The camcorder's microphone is too close to the TV.
] Position the camcorder so its microphone is away from the TV.
●
The TV's volume is too high.
] Turn the TV's volume down.
When scanning channels, some of them are skipped over.
●
Those channels have been designated to be skipped.
] If you need the skipped channels, restore them using AManual
Channel SetB. (A pg. 80)
Channel settings that were made manually seem to have
changed or disappeared.
●
After the manual settings were made, Auto Channel Set was
performed.
] Do no perform Auto Channel Set after making manual settings,
proceed to perform AClock SetB (A pg. 82).
Malfunction occurs and the unit cannot be power off.
] Reset the unit by disconnecting the AC power plug from the AC
outlet and connect again.
TROUBLESHOOTING
88