Setting Auto Surround And Virtual Surround Back - JVC SP-PWR1 Instructions Manual

BASIC OPERATIONS ON DVD DECK
Setting Auto Surround And Virtual
Surround Back
●
Turn on the unit.
●
Turn on the TV and select an input mode such as EXT1.
●
Set the remote control selector switch to AUDIO.
●
Press DVD on the remote control.
DVD
SETTING
There is a time limit when performing the following setting. If the
time is up before completing the setting, re-perform from the
beginning.
Setting Auto Surround
Auto Surround works when the unit detects the incoming digital
signal. In other words, it is activated under the following cases.
●
When a digital sound source is selected.
●
When the input mode changes from analogue to digital.
1
Press SURROUND repeatedly.
2
AAUTO SURRB lights on the front display panel.
3
Each time you press SURROUND, the Surround mode
switches in the following order.
L C R SW
LS RS LFE
D
AUTO SURRNDOLBY D
THEATER2NHALL1NHALL2NLIVE CLUBNDANCE CLUBN
PAVILIONNALL CH STNSURR OFFN (back to the beginning)
* The display changes as follows according to the sound source.
● During 2-channel source
N N
PL II MOVIE PL II MUSIC
● During DUAL MONO
N N
DUAL MONO
27
1 2 3
4 5 6
AUDIO
TV
SAT
7 8 9
0
SURROUND
Selection Keys
VOL
(FGDE)
ENTER
Speaker output
adjustment buttons
(or )* NTHEATER1N
DTS
●
If a multi-channel signal is detected,
an appropriate Surround mode will be
activated.
●
If a Dolby Digital II-channel signal with
surround signal is detected,
AUTO SURR PL II MOVIE will be selected.
●
If a Dolby Digital II-channel signal
without surround signal is detected,
ASURR OFFB will be selected.
●
If a Linear PCM signal is detected,
nothing changes.
SURR OFF Deactivates Auto Surround.
Setting Virtual Surround Back
You can enjoy the effect of Virtual Surround Back when playing
back Dolby Digital EX or DTS-ES software without Surround Back
speakers. This function creates sound effects from behind as if
Surround Back speakers are connected.
1
Press SETTING.
The item of the setting performed most recently is displayed on
the front display panel.
2
Press selection keys to display AVRTL SB :B on the front
display panel.
3
Press selection keys to select AVRTL SB : ONB.
L C R SW
LS RS LFE
D
VIRTUAL AVRTL SB : ONB lights on the front
SURROUND display panel when playing back Dolby
BACK ON Digital EX or DTS-ES software.
VIRTUAL Select to deactivate Virtual Surround
SURROUND Back.
BACK OFF
Switches between
ON-OFF.