JVC SP-PWR1 Instructions Manual page 55

To Timer Record The Programme With The
Programmed Disc
1
Load a programmed disc.
2
Press AUDIO A to turn off the power.
●
appears on the front display panel, and the unit enters
into timer standby mode.
● To disengage the timer mode, press AUDIO A again.
NOTES:
●
On-Disc Timer Programming is not possible on a DVD-R or DVD-
RW (Video mode) disc.
●
The information of a programme recorded with On-Disc Timer
Programming is not stored in the library.
●
The play list is not created for the programmes recorded with On-
Disc Timer Programming.
●
Programmes recorded with On-Disc Timer Programming cannot
be edited or protected.
●
On-Disc Timer Programmed discs cannot be used for other
recordings other than On-Disc Timer Programming.
●
On-Disc Timer Programmed discs cannot be used on units from
other manufacturers.
●
The beginning of a programme may not be recorded. In addition,
if the 1st programme's recording stop time and the 2nd
programme's recording start time is the same, the ending of the
1st programme may not be recorded.
●
If there is a power outage while recording, the recordings when
the power outage occurs are not guaranteed.
●
TV DIRECT mode is activated when the unit turns on
automatically during timer recording.
How Discs Are Overwritten
(Example 1)
To record a 1-hour serial drama every Friday in SP mode
1st
Blank
2nd 3rd
The first programme is
overwritten by the third.
(Example 2)
To record a 15-minutes serial drama every morning in XP
mode
4th 1st
12/6 12/3
3rd 2nd
12/5 12/4
(Example 3)
To record a 90-minutes serial drama every Sunday in SP
mode
Blank
1st
3rd
Blank
NOTES:
●
On-Disc Timer Programming may not always work as these
examples.
●
On-Disc Timer Programming may not complete successfully if
the recording stop time is extended due to VPS/PDC.
TIMER RECORDING
2nd 1st
4th 3rd
The second programme is
overwritten by the fourth.
8th 5th
12/7
12/10
7th 6th
12/9 12/8
2nd
Blank
Areas treated as blank cannot
be played back even if they
contain recorded material.
52