ECB-1221R Wireless Long Range Multi-function Client Bridge
IP Address: Enter the IP address.
Subnet Mask: Enter the subnet mask for the IP address.
Default Gateway: Enter the IP address for the default gateway.
DHCP: Select Server from the drop-down list since this d evice is the DHCP server.
This device will distribute the IP addresses to the clients associated.
DHCP Client Range: Enter the first and last IP address of the range. Make sure that
the r ange is on th e sam e s ubnet a s the d evice. You may clic k on the S how Cl ient
button to view a list of IP addresses that were distributed.
Click on t he Apply Changes b utton t o c onfirm t he changes. This d evice will
automatically restart once these changes have been applied.
SNMP Settings
SNMP Daemon: Select Enable if you would like to use the SNMP feature.
Read-Only Community Name: Specify the p assword f or access the S NMP
community for read only access.
Read-Write Community Name: Specify the passw ord f or access t o the S NMP
community with read/write access.
Send SNMP Trap: Select Enable if you would like to receive SNMP traps.
Send Trap To: Specify the IP address that would receive the SNMP traps.
Click on the Save Settings button once you have modified the settings.
57