Basic Settings (Infrastructure, Adhoc) - EnGenius ECB-1221R User Manual

ECB-1221R Wireless Long Range Multi-function Client Bridge

Basic Settings (Infrastructure, Adhoc)

Click on the Basic Settings lin k und er t he Wireless men u. Using this o ption you
may configure the 802.11b/g settings as well as the frequency, channel, and SSID.
Band: Depending on the type of wireless clients that are connected to the network,
you m ay select B, G, or B+G. If y ou ar e not s ure about w hich c lients will be
accessing the wireless networks, it is recommended that you select B+G for the best
performance.
SSID: The S SID is a un ique nam ed s hared amongst a ll t he points of the wirel ess
network. The SSID must be identical on all points of the wireless network and cannot
exceed 32 characters.
Channel: Sel ect a c hannel from the dr op-down list. T he c hannels av ailable are
based on the country's regulation. When selecting Infrastructure mode, a channel is
not r equired, h owever, whe n s electing A dhoc mo de, you mu st select the same
channel on all points.
Enable Universal Repeater Mode: Select Enable to activ ate U niversal R epeater
Mode and type below SSID for extended wireless interface.
34